***********************************************************************
   **        T h e   C r a w l y   C r y p t   C o l l e c t i o n        **
   *                            P r e s e n t s                            *
   **                          Hardware Projects                          **
    ***********************************************************************

144_NEWL  Complete instructions by Wes Newell for installing a high density
          (1.44 meg) floppy in any Atari ST.  Originally posted as a public
          message in the AtariNet tech echo.
2_5RAM    A 2.5 MegaByte RAM Expansion for the Atari ST by Christopher Hicks.
          This document details the addition of an extra 2 Megs of RAM to a
          standard 520/ 1040 STF/ STFM.  This procedure should work for any
          motherboard revision.
38400BPS  A hardware project by Jrgen Meyer that will give every ST / STe a
          38400 serial port.  This upgrade consits of a TTL-chip, the 74LS74
          (and a switch to choose the high baudrate) and is very easy to
          install.
4JADAPT   Plans to build an adapter that lets you use 4 joysticks with the ST.
          The 2 extra joysticks connect through the parallel port and will
          work with many games (including "Leatherneck").
AUDIO     Adding Audio Ports To An ATARI ST by William Mills.  A hardware
          project that allows the ST to be connected to a stereo or amp using
          standard RCA connectors.  It also allows the use of headsets, for
          video games.
FADEFIX   Instructions to fix a common problem with Atari SM124 monochrome
          monitors.  Most SM124s have an insufficently regulated power supply
          which allows the 70 volt line to drift high when less than a certain
          number of pixels are lit.
FLOP14ST  Complete plans that show how to add a 1.44 meg floppy disk drive to
          your ST.  Replace that old 720K floppy with a new high density
          floppy drive today!
NEXMSYNC  NEC MultiSync II to Atari ST by David S. Weaver.  This archive
          contains a text file that describes how to build a switch box to
          connect the MultiSync to the ST to allow use of color or monochrome
          with the flick of a switch.
RGBTOCOM  Atari RGB to Composite Video Converter by Anees Munshi.  Complete
          docs & schematic to build a device that converts an ST analog RGB
          signal to an NTSC composite signal which can be displayed on a
          composite monitor, or TV.
TOS206IN  Instructions to install TOS 2.06 in an ST without using a TEC board
          or a TAB board.