3D Viewing Studio Menu Screen

               Overview
    This screen allows you to view one
of the eight 3D objects created on the
3D Construction Screen. The object
displayed is the same as the one that
was last being edited. Using this
screen you can place the object at any
desired angle and plot the wire frame
result onto the current work screen.
See the 3D section and the tutorial
concerning this later in the manual. To
enter this screen you must click on the
View Obj item on the 3D Construction
screen.

Item: Bank
Type: Plus/Minus Bar
Desc: This selects the angle of
rotation around the Z axis that the
object is displayed with.
Opts: All 3D Options (3VM,3CM)

Item: Bearing
Type: Plus/Minus Bar
Desc: Similar to Bank, but rotates
around the Y Axis.
Opts: All 3D Options (3VM,3CM)

Item: Colour Selector
Type: Icon Selector
Desc: Selects which colour the 3D
object is displayed in and also the
colour in which it will be plotted onto
the work screen using the Plot button.
Opts: All 3D Options (3VM,3CM)

Item: Exit
Type: Action Bar
Desc: Returns you to the 3D
Construction Studio.
Opts: None

Item: Move X
Type: Plus/Minus Bar
Desc: This determines the distance
along the X axis which the object is in
relation to the viewer (the horizontal
distance).
Opts: All 3D Options (3VM,3CM)

Item: Move Y
Type: Plus/Minus Bar
Desc: Determines distance along the Y
Axis (the height).
Opts: All 3D Options (3VM,3CM)

Item: Move Z
Type: Plus/Minus Bar
Desc: Determines distance along the Z
axis (like a zoom).
Opts: All 3D Options (3VM,3CM)

Item: Perspect
Type: Plus/Minus bar
Desc: Changes the perspective value
used to represent the shape of the lens
in the eye. You can produce some
strange effects setting this to obscure
values.
Opts: All 3D Options (3VM,3CM)

Item: Pitch
Type: Plus/Minus Bar
Desc: Determines how far the object is
rotated around the X axis.
Opts: All 3D Options (3VM,3CM)

Item: Plot
Type: Action Bar
Desc: Clicking on this option brings up
the current work screen upon which you
may plot the 3D object shown in the
viewing window. Use the left mouse
button to plot the object. The lines
which make up the object will be drawn
according to the current line effects,
so if you have selected a thick line
with arrowed ends from the Line Specbox
(Main Menu), then the object will be
drawn with that type of line. Use the
right button to go back to the 3D
Viewing Studio.
Opts: All 3D Options (3VM,3CM)

Item: Reset
Type: Action Bar
Desc: By pressing this button, all the
values represented by the Plus/Minus
Selectors on the screen will be set
back to the values they were when
Canvas was loaded. The current values
can be viewed on the viewing window
itself by clicking once on it.
Opts: All 3D Options (3VM,3CM)

Item: Undo
Type: Action Bar
Desc: This button undoes any changes
made to the work screen since you
entered the Viewing Studio ie. any
Plots.
Opts: All 3D Options (3VM,3CM)

Item: Viewing Window
Type: Special Selector
Desc: This window displays the current
object in the position and rotation
determined by the various options on
the screen. If you click on the window
itself, the parameters will be
displayed. Clicking again will get rid
of them.
Opts: All 3D Options (3VM,3CM)