ÚÄÄÄÄÄÄÄÄÄ¿
				ÚÄÄÄÄÄÁÄÄÄ¿     ³              (R)
			      Äij         ³o    ³ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
  ComputerEase Business Systems ³   ÚÄÄÄÄÄÁÐÄÄ¿ ³  Association of
  7204 John Elizabeth Place     ³   ³         ³ÄÙ  Shareware
  Prince George, VA 23875       ÀÄÄij    o    ³    Professionals
			      ÄÄÄÄÄij    º    ³ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
				    ÀÄÄÄÄÐÄÄÄÄÙ    MEMBER
     
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
	   ChronoLog Version 1.1 - QUICK INSTALLATION INSTRUCTIONS
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
If you have a ChronoLog "master" diskette(s), one 3 1/2" or two 5 1/4" 
floppy(s), the files are not compressed.  There should be at least 15 files.  
See the file PACKING.LST for a listing of the minimum files required.  Do
not erase any of the system files!
			 
This procedure works the same for a first-time installation, or an upgrade 
(replacing an already installed version with a newer one).

Use the following procedure to install:

      - Insert the 3 1/2" floppy or 5 1/4" floppy #1 (contains the 
	file CLINST.EXE) into a floppy drive.

      - At the DOS prompt, type A:CLINST (or B:CLINST if that is the drive).
	This runs the ChronoLog System Installation Program which will 
	create a subdirectory on your hard drive and copy the system files 
	into it.  (If loading from 5 1/4" floppy, you will be prompted to 
	insert floppy #2.).  CLINIT (the ChronoLog Database Initialization 
	Program) and then CHRONO will both execute automatically.
 
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
If you have the ChronoLog files compressed into a single file (the 
file name should be CHRON110.xxx, where xxx is the compression 
extension such as ZIP, or EXE if it is a self-extracting file), 
use the following installation procedure:

      - You do not need to run CLINST.  Instead make sure that the 
	compressed file has been copied to the subdirectory on your
	hard drive wherein you want the ChronoLog system files to reside.

      - Decompress CHRON110.xxx.  If the decompress is successful, 
	you may delete CHRON110.xxx.

      - There should be at least 15 files when decompressed.  See the 
	file PACKING.LST for a listing of the minimum files required.
     
      - Type CLINIT (the ChronoLog Database Initialization Program) to 
	initialize a database in the subdirectory where the system files 
	reside.  CHRONO will then execute automatically.

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

NOTE...IF YOU HAVE ANY PROBLEMS WITH INSTALLATION, YOU MAY ACCOMPLISH THE 
       SAME PURPOSE BY: 

	- MANUALLY CREATING A SUBDIRECTORY ON YOUR HARD DRIVE 
	
	- COPYING ALL SYSTEM FILES INTO THE SUBDIRECTORY

	- RUNNING CLINIT

	- RUNNING CHRONO

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++