/* MountList for V1.3 */
 
/*  Mount Entry for the new Console Handler */
 
NEWCON:
    Handler = L:Newcon-Handler
    Priority = 5
    StackSize = 1000
#
 
/* This is an example of a non-filing system mount using a handler written
   in C.
*/
 
SPEAK:
    Handler = L:Speak-Handler
    Stacksize = 6000
    Priority = 5
    GlobVec = -1
#
 
/*  This is an example of an alternative type of non-filing device mount,
    used to mount the non-buffered serial handler
*/
 
AUX:
    Handler = L:Aux-Handler
    Stacksize = 1000
    Priority = 5
#
/*  This is a non-filing system device */
 
PIPE:
    Handler = L:Pipe-Handler
    Stacksize = 6000
    Priority = 5
    GlobVec = -1
#
 
/* This is an example of a mount list entry for using the recoverable
   ram disk.  Depending on the amount of memory you wish to devote to
   it, you may want to change the HighCyl value.
*/
 
RAD:       Device = ramdrive.device
           Unit   = 0
           Flags  = 0
           Surfaces  = 2
           BlocksPerTrack = 11
           Reserved = 2
           Interleave = 0
           LowCyl = 0  ;  HighCyl = 94
           Buffers = 10
           BufMemType = 1
#
 
/* Let's say you have an A2000 with an internal drive, and an external
   drive, and you want to refer to the external drive as DF1: as well
   as DF2:   Well, this MountList entry will do it for you.  This technique
   can be extended to provide you with a drive A: and B: if you really
   want.
*/
 
DF1:       Device = trackdisk.device
           Unit   = 2
           Flags  = 1
           Surfaces  = 2
           BlocksPerTrack = 11
           Reserved = 2
           Interleave = 0
           LowCyl = 0  ;  HighCyl = 79
           Buffers = 20
           BufMemType = 3
#
          MS0:    FileSystem = L:MessyFileSystem
                  Device = messydisk.device
                  Unit = 0
                  Flags = 0
                  LowCyl = 0 ; HighCyl = 79
                  Reserved = 0
                  Surfaces = 2
                  BlocksPerTrack = 9
                  Buffers = 5
                  DosType = 1
                  BufMemType = 1
                  BootPri = 0
                  Stacksize = 3072
                  Priority = 9
                  GlobVec  = -1
                  Mount = 1
#
          MS1:    FileSystem = L:MessyFileSystem
                  Device = messydisk.device
                  Unit = 1
                  Flags = 0
                  LowCyl = 0 ; HighCyl = 79
                  Reserved = 0
                  Surfaces = 2
                  BlocksPerTrack = 9
                  Buffers = 5
                  DosType = 1
                  BufMemType = 1
                  BootPri = 0
                  Stacksize = 3072
                  Priority = 9
                  GlobVec  = -1
                  Mount = 1
#