HOW TO USE THE AFCD SUBSDISK EXTRACTOR
                  ======================================

The extractor is still at an early stage in its development at the moment so
you might find it a bit temperamental if you don't follow these instructions...

     1. Double click on the "AFxxSubsDisk" icon. This will bring up a window
	with a text box in it.

	
     2. Have a disk ready. It must be write enabled, but the extractor
	doesn't care whether it is formatted or not.

	
     3. Insert the disk in df0:

	
     4. Type the password into the text field in the extractor's window and
	hit return.

	
     5. If you have entered the right password, the drive light will come on
	and stay on for about a minute (it might flicker, it depends on your
	drive).

	
     6. If you entered the wrong password, the drive light will come on for
	a maximum of ten seconds, then go out again. No other warning will be
	given. You can try entering the password again, making sure you are
	spelling the password correctly and that the capitalisation of the
	password is correct.
	

The only problems arise when you don't follow the order given here. If all else
fails, you can always reboot...