SEAGATE TECHNOLOGY, INC.
       Customer Technical Support FAX Network +1 408 438-8137
     Customer Technical Support Bulletin Boards (300-9600, 8-N-1)
ЪДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДВДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДї
і United States    +1 408 438-8771 і  United Kingdom +44 628 478011  і
ГДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДЕДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДґ
і Germany         +49  89 140-9331 і  Singapore      +65   227-2217  і
АДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДБДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДЩ
                            (C)opyright 1991



ST-3096A

                                                   4-pin DC
                   3-pin DC                        Power
                   Power   ХНННННННННН НННННННННё/Д4Д3Д2Д1Д\
                 НСН5НGН12Сµ::::::::::щ::::::::1Жі 0 0 0 0 ЖН
                  і 0 0 0 іФННННННННННСНННННННННѕАД5ДGДGД12Щ
                  ФН1Н2Н3Нѕ   (pin-20 missing
                               for keying purposes)

                User Configuration Block
              і (located behind 3-pin DC)
              АДДДДДДДВДДДДДДДДДДДДДДДДДД
                      і                                  1= On, 0= Off
(back of drive)    2 o-o 1  ДДД Life Test (do not use)
                   4 o-o 3  ДДД Master on (Slave off)ДДД 1  1  0
                   6 o-o 5  ДДД Slave Present ДДДДДДДДДД 0  1  0
                   8 o-o 7  ДДД Active LED
(front of drive)  10 o-o 9  ДДД Reserved                 S  M  S
                                                         i  a  l
                                                         n  s  a
                                                         g  t  v
                                                         l  e  e
                                                         r  r

                            ST-3096A


       UNFORMATTED CAPACITY (MB) ________________N/A
       FORMATTED CAPACITY (xx/17 SECTORS) (MB) __89.2
       ACTUATOR TYPE ____________________________STRAIGHT ARM
       TRACKS ___________________________________
       CYLINDERS __PHYSICAL/LOGICAL______________xx/1024
       HEADS ______PHYSICAL/LOGICAL______________3/10
       DISCS ____________________________________2
       MEDIA TYPE _______________________________THIN FILM
       RECORDING METHOD _________________________RLL (2,7)
       TRANSFER RATE INTERNAL (mbits/sec) _______12
       SPINDLE SPEED (RPM) ______________________3,528
       BUFFER ___________________________________32 KByte SeaCache
       INTERFACE ________________________________AT BUS
       TPI (TRACKS PER INCH) ____________________1,792
       BPI (BITS PER INCH) ______________________31,005
       AVERAGE ACCESS (ms) ______________________<15
       SINGLE TRACK SEEK (ms) ___________________3
       MTBF (power-on hours) ____________________150,000
       POWER REQUIREMENTS: +12V START-UP (amps) _0.9
       POWER MANAGEMENT (Watts):
                           ACTIVE _______________5.1
                           IDLE _________________2.5
                           STANDBY ______________0.8
                           SLEEP ________________0.8
       BUFFERED STEP PULSE RATE (micro sec) _____
       WRITE PRECOMP (cyl) ______________________N/A
       REDUCED WRITE CURRENT (cyl) ______________N/A
       LANDING ZONE (cyl) _______________________AUTO PARK
       IBM AT DRIVE TYPE ________________________*

 * MAY REQUIRE FORMATTING AND PARTITIONING SOFTWARE.  ALSO, CHECK TO
SEE IF YOUR CMOS SETUP HAS A "CUSTOM" OR "USER DEFINABLE" DRIVE TYPE
AVAILABLE. (see below)

Possible translation:  1024 cyl, 10 heads, 17 sectors = 89,128,960

Note: A "custom" or "user-definded" CMOS drivetype  may ask for a
numerical value for the Write Precompensation cylinder and for the
Landing Zone cylinder.  A basic rule-of-thumb for drive models that do
not require the old Write Precomp technique or a Landing Zone because
they are Auto-Parking is to add 1 to the cylinder value being used. As
an example: If cylinders equaled 820, then both Write Precomp and
Landing Zone would be entered as 821. Some BIOS will convert this to
65535 or -1, which are functionally equivalent to "none (not used)".

PHYSICAL/LOGICAL equivalent to NATIVE/TRANSLATION
ZBR = Zone Bit Recording = Variable sectors per track

Already low-level formatted at the factory.

Since a User-definable or Custom translation geometry may be used, it
is imperative that the values be written down and kept with your
permanent records for retrieval in the event of CMOS battery failure.

Seagate reserves the right to change, without notice, product
offerings or specifications. (5/13/91)