[CPU]

Type = Mixed				; CPU type is mixed
Mode = Enhanced 			; CPU mode is enhanced

[Debug]

Title = Gray				; Set debugger title color
BackGround = Intense White		; Set debugger background color
Data = Green				; Set debugger data color
Command = Gray				; Set debugger command color
Mnemonic = Red				; Set debugger mnemonic color
Flags = Yellow				; Set debugger flags color
Stack = Blue				; Set debugger stack color
Register = Gray 			; Set debugger register color
Address = Cyan				; Set debugger address color
Value = Red				; Set debugger value color

Scheme = Standard.Clr			; Use the standard color scheme

[Slot 0]

Type = Language 			; Slot 0 is a language card (32k)

[Slot 1]

Type = Serial				; Slot 1 is a super serial card
Port = COM1				; Use COM1 for super serial port
Baud = 2400				; Set baud rate to 1200
Stop = 1				; Use 1 stop bit
Length = 8				; Word length is 8 bits
Parity = None				; No parity generation/checking
Pullup = DCD + DSR + CTS		; Pull up the DCD/DSR/CTS lines

[Slot 2]

Type = Empty				; Slot 2 is empty

[Slot 3]

Type = Empty				; Slot 3 is empty

[Slot 4]

Type = Empty				; Slot 4 is empty

[Slot 5]

Type = Empty				; Slot 5 is a floppy disk controller

[Slot 6]

Type = Floppy				; Slot 6 is a floppy disk controller
A = \A2em\system.Dsk		; File name for drive A
B = \A2em\blank1.Dsk			; File name for drive B

[Slot 7]

Type = Cartridge			; Slot 5 is a cartridge card
Cartridge = MS-DOS.Crt			; Cartridge file name